Specifications of loadable media and maximum cutting area.

  • The following table shows specifications of sheet media and maximum cutting area.

* Note that the installed software determines the limit of the maximum cut length.

*1: It’s less than 200mm when CG-60 Optional stand (OPT-C0235) is installed.
*2: Maximum cut area
  The both edge of installed sheet media is fixed with rubber rollers (pinch rollers).
  (The pinch rollers are installed in the specified points).
  Cut width is determined within the pinch rollers.
  (Expand function lets the printer read and cut outside of the pinch rollers).

Return to Content

Topo da Página