MIMAKI BRASIL

Some parts of the cut line created outside the data are not being cut.

  • See the followings.

This issue may occur when the thickness of the cut line is less than 0.1 points.
The symptoms may occur because the cut lines created with the [Frame Extraction] and
[Convert Cut Line] functions in RasterLinkTools have a line thickness setting of 0.001 points.



The symptoms can be avoided by implementing one of the following measures.

Countermeasures

[Method 1]
Place dummy objects outside the cut line and save as EPS.



[Method 2]
Create the cut lines with a thickness of 0.1 points.
* If the cut lines are created using the [Frame Extraction] or [Convert Cut Line]
functions in RasterLinkTools, please adjust the line thickness to 0.1 points.


Return to Content

Topo da Página