MIMAKI BRASIL
CJV150 Series
O FAQ é dividido por categorias. Clique no link relacionado a sua dúvida.
About specifications
- Power supply specifications
- Which media size and weight can be used?
- What type of swivel cutter blade can be used?
- Environmental requirements for installation
- What system configuration do I need？
- What type of ink can be used?
- What is ink cartridge lamp and what does it tell you?
- What is UISS (Uninterrupted Ink Supply System)?
About operation and handling
- How do I discard ink in the waste ink tank?
- How do I turn off the heater when printing is finished?
- What is the work flow of Cut after Print and Print after Cut？
- How do I set the heater temperature?
- If I’m not using special color ink (White or Silver), can I still proceed my printing when special color ink hits ink end?
- I want to relocate the printer. Are there any precautions that I may be aware of?
- How do I replace the tools (cutter and pen) in the cutter unit?
- How do I cut the sheet (dotted line cut)?
About related Ink
About maintenance
About cutmark
Error messages and Warning messages
About trouble
- How can I perform dot position adjustment to correct horizontal shifting in bi-directional printing? (DROP.POScorrect)
- How can I correct the media feed to eliminate the horizontal stripes on the printed material? (Media correction)
- The colors have changed when comparing with the previous print results.
- Ink drips during printing.
- Nozzles on the same line are becoming misaligned in the test pattern.
- Numerous horizontal lines appear in the print results.
- Fine ink droplets occur in the print results.
- Nozzle dropout or deflection are not resolved in the test print.
- The print result is blurred or ink splatters.
- White spots or mottled unevenness appear on the printed material.
- The printing is misaligned diagonally.
- Mist-like droplets are generated on printed material, similar to those sprayed from a spray bottle.
- How to adjust using the "TP OFFSET" when the registration marks are misaligned for trim cutting?
- How to adjust for misalignment in Print & Cut without registration marks using the "PC ORIGIN OFFSET" feature.
Em caso de dúvidas, entre em contato conosco através do formulário.