• Retornar a página anterior

Mimaki Driver Ver.5.9.6 (64bit)

Tipo	Device Driver
Versão	5.9.6
Data de lançamento	17/10/2024
Sistemas operacionais suportados	Windows 10 (64bit) Windows 11
Sistemas operacionais suportados	APC-130, CF3-1610M, CF3-1610R1, CF3-1610TF2, CF3-1631M, CF3-1631R1, CF3-1631TF2, CF22-1225RC-S, CF22-1225RT-S, CF22-1225T-S, CF22-1225TD-S, CF22-1225TF-S, CG-60AR, CG-60SRIII, CG-75FXII, CG-75FXII Plus, CG-100AR, CG-100SRIII, CG-130AR, CG-130FXII, CG-130FXII Plus, CG-130SRIII, CG-160FXII, CG-160FXII Plus, CJV150-75, CJV150-75BS, CJV150-107, CJV150-107BS, CJV150-130, CJV150-130BS, CJV150-160, CJV150-160BS, CJV200-75, CJV200-130, CJV200-160, CJV300-130, CJV300-130 Plus, CJV300-130BS, CJV300-160, CJV300-160 Plus, CJV300-160BS, CJV330-130, CJV330-160, JFX200-1213 EX, JFX200-2513, JFX200-2513 EX, JFX600-2513, JFX600-2531, JV100-160, JV150-130, JV150-130A, JV150-130BS, JV150-160, JV150-160A, JV150-160BS, JV300-130, JV300-130 Plus, JV300-130A, JV300-130BS, JV300-160, JV300-160 Plus, JV300-160A, JV300-160BS, JV300-190, JV330-130, JV330-160, TS100-1600, TS330-1600, TxF150-75, TxF300-75, UCJV300-75, UCJV300-107, UCJV300-130, UCJV300-160, UCJV330-130, UCJV330-160, UJF-3042 , UJF-3042FX, UJF-3042HG, UJF-3042MkII, UJF-3042MkII EX, UJF-3042MkII EX e, UJF-3042MkII e, UJF-6042, UJF-6042MkII, UJF-6042MkII e, UJF-7151 plus, UJF-7151 plusII, UJF-A3MkII, UJF-A3MkII EX, UJV100-160, UJV100-160Plus

The following functions have been change

[Ver.5.9.5 -> Ver.5.9.6]

• The following models are available.

CJV200, JFX200-1213EX

• The following ink is available in JV330 / CJV330.

SS22 4Color / 6Color

• Job names can now be displayed in the PICT print history.

CJV200, JFX200-1213EX, JFX200-2513EX, UJV100Plus

[Ver.5.9.4 -> Ver.5.9.5]

• The following ink is available in JFX600-2513 / JFX600-2531.

LUS-120 6Color+WCl

LUS-150 6Color+WCl

• Job names can now be displayed in the PICT print history.

TxF150, TxF300, KebabHS(UJF-7151plusII, UJF-6042MkIIe, UJF-3042MkIIe)

[Ver.5.9.3 -> Ver.5.9.4]

• The following ink is available in UCJV330.

LUS-190 4Color / 4Color+WW

LUS-210 4Color / 4Color+WW

[Ver.5.9.2 -> Ver.5.9.3]

• The following models are available.

JFX600-2531

• Job names can now be displayed in the PICT print history.

JV330, CJV330, TS330, UCJV330

[Ver.5.9.0.5 -> Ver.5.9.2]

• The following ink is available in JFX600.

LUS-211 4Color / 4Color+ClClWW

• The following ink is available in UCJV330.

LUS-200 4Color / 4Color+WW

[Ver.5.9.0 -> Ver.5.9.0.5]

• The following defects have been improved.

- There are cases where white ink may be output too thick.

[Target printer] TxF150, TxF300

[Ver.5.8.2 -> Ver.5.9.0]

• The following defects have been improved.

- Communication error or printing stops occur at random times.

[Ver.5.8.0 -> Ver.5.8.2]

• The following ink is available in JFX200EX.

LUS-211 4Color+ClClWW

[Ver.5.7.3 -> Ver.5.8.0]

• The following models are available.

UCJV330, UJV100Plus

[Ver.5.7.2 -> Ver.5.7.3]

• The following ink is available in JFX600.

LUS-120 4Color+ClClWW, LUS-150 4Color+ClClWW

[Ver.5.7.1 -> Ver.5.7.2]

• The following models are available.

TxF300

[Ver.5.7.0 -> Ver.5.7.1]

• The following defects have been improved.

- Nozzle Recovery may not be enabled.

        [Target printer] JV100, TS100, UJV100

[Ver.5.6.9 -> Ver.5.7.0]

• The following models are available.

JFX200EX

• The following defects have been improved.

- Manual MAPS may not be enabled.

        [Target printer] JV300, CJV300, JV150, CJV150

[Ver.5.6.8 -> Ver.5.6.9]

• The following models are available.

TxF150

• The following defects have been improved.

- When using nozzle recovery on two layers, the panel may indicate that some nozzles are not recoverable even though nozzle recovery is possible.

        [Target printer] JV330, CJV330

[Ver.5.6.7 -> Ver.5.6.8] 

• The following defects have been improved.

- When setting [Step & Repeat] and print, printing speed slows down.

- When combining [RIP and Print] and [Tiling], the left edge of the second and subsequent tiles may be cut off by several centimeters.

- At MkII and MkIIe, discharged result has changed only specific data.

- JFX600 which mounted LUS-120 four colors are not displayed on the printer registration screen, and the printer cannot be registered.

- The layer output icon is not displayed on the thumbnail image during 2.5D printing/ composite printing.

- When combining the pre-print margin and [Step & Repeat], a portion of the printing area is output without printing.

[Ver.5.6.6 -> Ver.5.6.7] 

• When using RasterLink7, primer recommended density has been supported at LH-100 and LUS-120 in JFX600
• The following defects have been improved.

When using RasterLink7, white ink at higher density printing cannot be executed in the combinations of printer and ink set described below.

 [Target printer] UJF-6042MkIIe、UJF-3042MkII Ex e     Ink set: CMYKClPrWW

[Ver.5.6.5 -> Ver.5.6.6] 

• Improved operation during Ethernet communication.

[Ver.5.6.4 -> Ver.5.6.5]

• The following defects have been improved.

- When nozzle recovery is enabled, an error may occur during output.

[Target printer] JV300, JV150, CJV300, CJV150

[Ver.5.6.3 -> Ver.5.6.4]

• The following Colors are available in JFX600.

LUS-120 4Color / 6Color+SP / 4Color+SP

[Ver.5.6.2.2 -> Ver.5.6.3]

• The following defects have been improved.

- Cannot output from FineCoat when using DCF-605PU.

- When using combination of USB1.1 and Windows10/11, connection may not be possible depending on state of PC UCSI device (USB type-C).

[Target printer] USB1.1 device (CG-SR2, CG-FXII)

[Ver.5.6.2 -> Ver.5.6.2.2]

• The following defects have been improved.

- Fix the defect that may cause graininess when printed with Hi scan.

[Target printer] UJV100 4C+SP, UJV100 SP+4C, JV100 8C

[Ver.5.6.1 -> Ver.5.6.2]

• The following models are available.

JV330, CJV330, TS330

• LUS-200 ink is available in the following printers.

UJF-3042MkII, UJF-3042MkII EX, UJF-6042MkII

The following Colors are available in JFX600.

• LUS-150 4Color, LUS-150 6Color+SP

[Ver.5.6.0 -> Ver.5.6.1]

• LUS-210 ver2 ink is available in UJV100.

[Ver.5.5.3 -> Ver.5.6.0]

• LUS-200 ink is available in the following printers.

UJF-3042MkII e, UJF-3042MkII Ex e, UJF-6042MkII e

[Ver.5.5.2 -> Ver.5.5.3]

• The following defects have been improved.

For a job of color layer or white layer, illuminance does not change at printing even after illuminance of UV mode is changed and printing is executed.

[Ver.5.5.1 -> Ver.5.5.2]

• In JFX600, Glossy Print can be selected by UV mode of clear plate.
• In JFX600, following Special Color Over Print is available.

[Ver.5.5.0 -> Ver.5.5.1]

• Added support for silver ink on the UJF-7151plusII.

[Ver.5.4.2 -> Ver.5.5.0]

• The following models are available.

UJF-7151plusII, UJF-6042MkIIe, UJF-3042MkIIe, UJF-3042MkII EXe

[Ver.5.4.1 -> Ver.5.4.2]

• The following models are available.

UCJV300

[Ver.5.4.0 -> Ver.5.4.1]

• The following models are available.

UJF-7151, UJF-6042MkII, UJF-3042MkII, UJF-3042MkII EX, UJF-A3MkII, UJF-A3MkII EX

[Ver.5.3.3 -> Ver.5.4.0]

• The following models are available.

JV300, JV150, JV300Plus, CJV300, CJV150, CJV300Plus

[Ver.5.3.0 -> Ver.5.3.3]

• Image quality defects that occur under certain conditions have been improved.

[Ver.5.1.0 -> Ver.5.3.0]

• TS100 are available.
• Improved operation during Ethernet communication. (JV100, UJV100)

[Ver.5.1.0]

• JV100 is available.

---

 

 

 

Procedimentos para download

Leia o "Contrato de Licença de Software"

Retornar a página anterior